Voron Trident Fastener Kit rev A (ss304 silver) (discontinued)
This is a full fastener kit for all Trident Sizes. All pieces are very high quality SS304 stainless steel except for the roll-in t-nuts (carbon steel) and the heat-set inserts (brass). Comes with 10-20% extra above the BOM requirements, so no frets if you lose or break a piece. (note roll-in t-nuts do not work with LDO frames. We are fixing this!)
| Specification | BOM |
Tensor3D Kit |
| M3x6 BHCS | 34 | 38 |
| M4x6 BHCS | 7 | 9 |
| M5x10 BHCS | 55 | 61 |
| M5x16 BHCS | 40 | 44 |
| M5x30 BHCS | 6 | 8 |
| M3x12 FHCS | 10 | 12 |
| M3x6 FHCS | 14 | 16 |
| M3 Hammer Head T-nuts | 65 | 72 |
| M3 Threaded Insert (M3x5x4) | 52 | 58 |
| M3 Hexnut | 2 | 4 |
| M5 Hexnut | 15 | 17 |
| M3 Locknut | 6 | 8 |
| M3 Roll-in T-nut | 88 |
97 |
| M5 Roll-in T-nut | 69 | 76 |
| M2x10 Self-Tapping Screw | 20 | 22 |
| M3x12 SHCS | 65 | 72 |
| M3x16 SHCS | 16 | 18 |
| M3x20 SHCS | 8 |
10 |
| M3x30 SHCS | 21 | 24 |
| M3x40 SHCS | 6 | 8 |
| M3x8 SHCS | 145 | 160 |
| M5x40 SHCS | 10 | 12 |
| M4 Knurled Nut | 3 | 4 |
| M3 Washer | 2 | 4 |
| M5 1mm Spacer | 22 | 25 |
Customer Reviews
Based on 3 reviews
Write a review